RCC MANUAL DESIGNS

//RCC MANUAL DESIGNS
RCC MANUAL DESIGNS2020-04-10T14:35:34+05:30

Project Description

Best RCC Manual Designing Training in Hyderabad

Cistotech offering RCC Manual Designing Training in Hyderabad,

What is Structural Engineering?

Structural engineering is the field of engineering that deals with the design of building and other non-building structures. Structural engineering is a specialty of civil engineering, where a structural engineer ensures that architectural components are structurally sound.

Responsibilities of a Structural Engineer

  • A structural engineer works closely with clients, architects, building contractors and other engineers.
  • Work activities of a structural engineer depend on the structures being worked on and the teams.
  • A structural engineer will have to perform the following tasks:
    • Design models of structures using software perform accurate calculations about each elements of a building
    • Assessing the reaction of buildings to pressures and stress finalising the materials that would be suitable for the structure
    • Assessing budget of the project liaising with construction contractors to ensure that newly erected buildings are structurally sound
    • Applying expert knowledge of the forces that act on various structures
    • Using computers and computer-aided design (CAD) technology for simulation purposes Educational

 Why this course?

  • This course aims at providing students with a solid background on the principles of structural engineering design. Students will be exposed to concepts of RCC concrete design and analysis.
  • There is a Gap between Theoretical Knowledge what you studied in the College and the Practical Knowledge.
  • In this Practical diploma in RCC Structural designing course you will learn all the Practical Fundamentals and Concepts of Structural Designing.
  • You will learn how to start structural designing when you get a Plan from Architect till completion of the Project.

DIPLOMA IN RCC STRUCTURAL DESIGNING:

Includes:

  1. Introduction to Structural Engineering
  1. Manual load calculations
  • Load calculation on beams
  • Load calculation on columns
  • Load calculation on slabs
  1. Manual designing of Rcc elements
  • Manual design of beams
  • Manual design of column
  • Manual design of slabs
  • Manual design of footing
  • Manual design of staircase
  1. General Layout and Preparation of structural drawings
  • Studying of architectural plans
  • Preparing columns positioning layout
  • Preparing beam framing layout
  • Preparing slab framing layout
  • Centreline layout
  1. Detailing of Rcc elements using CAD
  • Detailing of beams
  • Detailing of columns
  • Detailing of slabs
  • Detailing of footing
  • Detailing of staircase
  1. Preparation of design report
  2. Working on live projects

MODULE 1:

  • Introduction to structural analysis and design
  • Overview of designing codes and provisions

MODULE 2:

  • Preparing grid system (uniform and custom)
  • defining material
  • defining section properties
  • assigning section properties
  • Assigning support condition
  • Defining slab properties
  • Assigning slab properties

MODULE 3:

  • Defining static load cases
  • Assigning load cases ( member load and area load)
  • Dead load
  • Live load
  • Floor finishing load
  • Wall load
  • Defining lateral loads
  • Earthquake load
  • Wind load
  • Load combinations

MODULE 4:

  • Introduction to Analysis
  • Perform Analysis
  • Overview of Output Page
  • Perform design of structural elements
  • Overview of design output
  • Live project

MODULE 5:

  • Modelling of shearwall
  • Analysis and design of shearwall
  • Modelling of flat slab
  • Importing CAD Models
  • Report Setup
  • Creating design report

MODULE 6: Manual designing of structural elements

  • Manual design of beams
  • Manual design of columns
  • Manual design of footings
  • Manual design of slabs

MODULE 7: Manual load calculation of structural elements

  • Calculation of loads on beams
  • Calculation of loads on slabs
  • Calculation of loads on columns
  • Grouping of loads
  • Live project

MODULE 8: Detailing of structural elements in CAD

  • Detailing of beams
  • Detailing of slabs
  • Detailing of columns
  • Detailing of footing
  • Detailing of staircase

MODULE 9:  SEISMIC ANALYSIS

  • INTRODUCTION OF LINEAR STATIC AND DYNAMIC ANALYSIS
  • SEISMIC COEFFICIENT METHOD
  • INTRODUCTION OF RESPONSE SPECTRUM ANALYSIS AND MODELLING
  • INTRODUCTION OF NONLINEAR ANALYSIS
  • INTRODUCTION OF PUSHOVER ANALYSIS AND MODELLING
  • TIME HISTORY ANALYSIS AND MODELLING

COURSES THAT WE ARE OFFERING

AUTOCAD
ETABS / SAFE
PRIMAVERA P6
RCC DETAILING
3DS MAX
REVIT ARCHITECTURE
MS PROJECTS
CONSTRUCTION DRAWING
QUANTITY SURVEYING
STAAD PRO
REBAR DETAILING
RCC MANUAL DESIGNS
CATIA
PRO-E (CREO)
UNIGRAPHICS (NX)
SOLIDWORKS

COURSE FACULTIES

MR. SHISHIR
MR. SHISHIRCorporate Trainer & Civil Engineer
Having 21 years of Experience. Worked with NEILSOFT-Pune; My Home Constructions in Hyderabad; Ramtech Software Solutions Ltd Hyderabad; MOLDTEK Technologies Hyd; Facet Construction Engineers. Corporate Trainer for Rebar Detailing, Quantity Surveying, Etabs, STAAD Pro, Revit, Construction Management & Primaveera.
MR. GOPI RAMAKRISHNA
MR. GOPI RAMAKRISHNASr. Mechanical Faculty
Having 7 years of real-time working experience along with teaching mechanical designing courses like, AutoCAD, CATIA, SOLIDWORKS, UNIGRAPHICS, and ANSYS. Must attend the demo class to find out the quality of the subject.
MR. MOSHIN
MR. MOSHINCivil Engineering Faculty
Most Experienced and Real-time Faculty in Civil Engineering at Cistotech Institute.
Having 11 Years of excellence in Providing quality training.

Join Over 50,000 Students Uplifted Their Career with Cistotech Civil and Mechanical Institute

Become Part of Cistotech to Further Your Career.

New Courses

INQUIRE NOW

Contact Info

Flat # 208A, Nilgiri Block, Aditya Enclave, Ameerpet Hyderabad – 500016

Mobile: +91 7675007343

Web: Website